Hanging the lithium battery in the camcorder, Te on lithium battery, Ning – Sony CCD-TRV30 User Manual
Page 19: Tanging the lithium battery, Note on the time indicator, Resetting the date and time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
hanging the Lithium Battery in the Camcorder
ur camcorder is supplied with the lithium battery installed. When the battery becomes weak or
id, tij indicator flashes in the viewfinder or on the LCD screen for about 5 seconds when you set the
WER switch to CAMERA. In this case,
replace the battery with the Sony CR2025 or Duracell DL-
15
lithium battery. Use of any other battery may present a risk of fire or explosion.
lithium battery for the camcorder lasts for about 1 year under normal operation. However, the
ium battery installed at the factory may not last 1 year.
te on Lithium Battery
lithium battery has a positive (+) and a negative (-) side as illustrated,
iure to insert the lithium battery with the positive side facing out.
^NING
battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.
3 the lithium battery out of the reach of children. Should the battery be swallowed, consult
ctor immediately.
tanging the Lithium Battery
n replacing the lithium battery, keep the battery pack or other power source attached. Otherwise,
.vill need to reset the date, time and the other items marked with * on page 32.
fpen the lid of the lithium battery compartment under the grip strap of the camcorder.
’ush the battery down once and pull it out from the holder.
iistall the lithium battery with the positive (+) side facing out. Close the lid of the battery
ompartment.
Resetting the Date and Time
You can reset the date and time in the menu system in CAMERA mode.
(1) While pressing PUSH OPEN, open the LCD panel.
(
2
)
Press MENU to display the menu on the LCD screen.
(3)
Press
1*
or to select CLOCK SET (p.32), then press EXECUTE.
(4)
Press
1“
or
-k
to adjust the year, and then press EXECUTE..
(5)
In the same way as for the year, adjust the month, day, hour and minutes using
"h,
and
EXECUTE.
Note that when you hold down t or the indications in the menu display advance faster.
(
6
)
Press MENU to erase the menu display.
To Check the Date and Time
Press DATE to display the date indicator.
Press TIME to display the time indicator. When
you press the .same button again, the indicator
goes out.
1995 •
1996
-2025
Note on the time indicator
The internal clock of the camorder operates on a
12-hour cycle.
12:00:00 AM stands for midnight. 12:00:00 PM
stands for noon.
37