Selecting the mode setting of each item, Terns in camera and vtr modes, Ommander Page 17: Eef (ccd-trv40 only), Uto date
Page 17: Eef (ccd-trv40 only), Uto date
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Changing the Mode Settings
Watching on a TV Screen
Selecting the Mode Setting of Each Item
terns in CAMERA and VTR Modes
OMMANDER
Select ON when using the supplied wireless Remote Commander for the camcorder.
Select OFF when not using the Remote Commander for the camcorder.
EEF
Select ON to turn the beep sound on.
Select OFF to turn the beep sound off.
OLOR*
elect this item and change the level of the indicator by press "F or to adjust the color intensity of the
icture when using the LCD.
lUE*
elect this item and change the level of the indicator by press 'F or 'F to adjust the tint of the picture
hen using the LCD.
terns in CAMERA Mode only
) ZOOM
Select ON to activate digital zooming.
Select OFF otherwise, the zooming ability becomes 12 x.
>UTO DATE
Select ON to record the date for 10 seconds after recording has started. (AUTO DATE feature p.ll).
Select OFF not to record the date.
EC LAMP
Select ON to let the camera recording/battery lamp on the front panel light during recording.
Select OFF not to let it light.
LOCK SET*
elect this item to reset the date or time. (p.37).
tern for VTR Mode only
DIT
Select ON to minimize picture deterioration when editing.
Normally select OFF.
These settings are retained even when battery is removed, as long as the lithium battery is in place.
You can use the camcorder as a VCR. Connect the camcorder to the TV by using the supplied A/V
connecting cable. There are two ways to connect the camcorder to your TV. When monitoring the
playback picture by connecting the camcorder to your TV, we recommend you use the house current as
the power source (p.22).
While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion may occur.
Connecting Directly to a TV
Connect the camcorder to the inputs on the TV by using the supplied A/V connecting cable. Set the
TV/VCR selector on the TV to VCR.
If your VCR is already connected to a TV
Connect the camcorder to the LINE IN inputs on the VCR by using the A/V connecting cable. Set the
TV/VCR selector on the TV to VCR.
To connect to a TV or a VCR without AudioA/ideo Input Jacks
Use an RFU adaptor (not supplied).
Monitoring the Picture from a TV or VCR
You can monitor the picture on the LCD screen or in the viewfinder. Connect the camcorder to Uic
outputs on the TV or VCR.
3
;