Unpacking, Hookup overview, Getting started – Sony STR-DE905G User Manual
Page 8: Before you get started
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Getting Started
Unpacking
Check that you received the following items with the
receiver;
• FM wire antenna (1)
• AM loop antenna (1)
• Remote commander RM-VPl (remote) (STR-DE905G
only) 0)
• Remote commander RM-VRl (remote) (STR-DE805G
only) 0)
• Size AA (R6) batteries (2)
• Remote control (RC) antenna (1) (STR-DE905G only)
• IR repeater (1)
• Video cable (1)
• Control S cord (1)
• Getting Started and Basic Operation Guide (1)
Hookup Overview
The receiver allows you to connect and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the receiver on the pages specified. To
learn the locations and names of each jack, see "Rear
Panel Descriptions" on page 45.
RC
Antenna
Hookups
(STR-DE905G only) (9)
Speaker TV/VCR Hookups (12)
System
Hookups (11)
Antenna Hookups (10)
AM/FM antenna
IR Repeater
Hookups (9)
□
Center
speaker
Active
woofer
Rear
speaker
(R)
Audio
Component
Hookups (10)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the AC power cords until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum
and noise.
• When connecting an audio/video cable, be sure to
match the color-coded pins to the appropriate jacks
on the compojients: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.