Sony STR-DE905G - Manual (Page 13)

Getting Started
VCR (via the VIDEO 1 jacks)
If you have two VCRs connect the second one to the VIDEO
2 jacks. If one of them has a StarSight tuner, be sure to
connect that one to the VIDEO 1 jacks.
Receiver
LD player
Receiver
If you have a CONTROL S compatible Sony TV, DBS
receiver, monitor, VCR or LD player
Use a CONTROL S cord (supplied) to connect the CTRL S
IN (for TV, DBS tuner, or monitor) or OUT (for VCR or LD
player) jack on the receiver to the appropriate S-LINK jack
on the respective component. Refer to the Operating
Instructions supplied with your TV, DBS receiver,
monitor, VCR, or LD player for details.
AC Hookups
Connecting the AC power cord
Connect the AC power cord from this receiver and
from your audio/video components to a wall outlet.
If you connect other audio components to the
SWITCHED AC OUTLET(s) on the receiver, the
receiver can supply power to the connected
components so you can turn on/off whole system
when you turn on/off the receiver.
SWITCHED AC OUTLET(s)
Caution
Make sure that the power consumption of the coinponent(s)
connected to the receiver's AC outlet(s) does not exceed the
wattage indicated on the rear panel. Do not connect high-
wattage electrical home appliances such as electric irons,
fans, or TVs to this outlet.
Where do I go next?
Before you u^e the receiver, yo to the next section to make
sure that all the controls are set to the appropriate positions.
Where do I go next?
Go on to the next section to connect an AC plug and
complete your home theater system.
Before You Use Your Receiver
Before you start using your receiver, make sure that
you have: •
• Turned MASTER VOLUME to the leftmost
position (0).
• Set the speakers to ON. (For details, see page 44.)
13