Sony STR-DE905G - Manual (Page 21)

Preparing and Using the Remote
button on the remote for about 5 seconds until the
instruction "RELEASE YOUR COMMANDER"
appears and the IR code setting indicator turns
off.
IR sensor
Keep the remote pointed horizontally at the IR
sensor until the code is programed.
If you tilt or move the remote during the
programing process, the IR code may not be
recorded correctly.
Repe?tthis procedure for the remaining buttons
After you've programed all the IR codes, the IR CODE
SETTING menu reappears.
To program special IR codes that do not appear as
on-screen controls
See "Programming Other Infrared (IR) Codes (USER IR
setting)" on page 22.
7 Repeat steps 3 to 6 to program IR codes from
other program sources.
To exit to the main menu
Click EXIT.
To return to a previous menu
Click RETURN.
To erase IR codes
Click CODE CLEAR.
• To erase a specific IR code
] Click SINGLE IR CODE CLEAR
2 Click the button you want to clear.
"Are you sure?" appears for confirmation.
3 Click YES to erase the code.
"CODE CLEAR!" appears in the display.
To stop before erasing a code, click NO.
To erase another code repeat steps 2 and 3.
• To erase all the IR codes for the current component (e g.,
OTHER CD).
1 Click (OTHER CD) CODE CLEAR.
"Are you sure?" appears for confirmation.
2 Click YES to erase the codes.
"CODE CLEAR!" appears in the display.
To stop before erasing the codes, click NO.
• To erase all the IR codes.
1 Click ALL IR CODE CLEAR.
"Are you sure?" appears for confirmation.
2 Click YES to erase the codes.
"CODE CLEAR!" appears in the display.
To stop before erasing ail the codes, click NC).
If the IR codes do not operate as expected
• Perform the programing operation(s) again to make sure
the IR codes were programmed correctly.
• If you experience difficulty operating the INPUT, number,
or ENTER buttons of a video deck or laserdisc player after
automatic registration from the manufacturer list in step 5.
Program the IR codes for that equipment manually as
shown in step 6.
• On some laser disc players made by other manufacturers,
the ►► and buttons may not operate correctly even
after automatically registration from the manufacturer list
in step 5. If this happens, perform step 6 to manually
program the IR codes for the ►► and buttons, as well
as anv other buttons that you want to use with the laser
disc player.
• If you register a playback source as TOSHIBA 2 or RCA 2,
you cannot turn the TV set on or off using the receiver's
remote (the power will not go on when you click TEST).
• Some IR codes may not have been successfully
programed, even if "RELEASE YOUR COMMANDER"
appears on the TV screen. In this case, try programing the
IR code again. If the IR code still cannot be programed,
follow the procedure described in "Programming Other
Infrared (IR) Codes (USER IR setting)" on page 22.
• The unit may not be able to record IR codes with special
wa\ etorms produced on some remotes.
Notes
• Do not register the same type of component (i.e., an LD
plac er) at several different functions.
• The unit emits an IR signal that cancels the automatic
pla\ back function of program sources, such as laser disc
and CD players, designed to start playing the moment
thev are turned on. To activate the auto play feature, set
the receiver's AUTO PLAY function to on.
• Keep tlce infrared sensor away from fluorescent light or
direct sunlight. Otherwise, the IR codes may not be
recorded.
• Even if the power cord has been disconnected from the
AC power outlet, recorded IR codes will stay in the
memorv for approximately two weeks. If thev disappear,
'ALL. CLEAR!" will appear on the TV screen the next time
vou turn on the receiver.
• Do not operate the remote supplied with the STR-DE805G
when "PUSH YOUR COMMANDER" appears on the TV
screen in step 6. Programing IR codes from the supplied
remote may cause the STR-DE805G to malfunction.
21