Sony STR-DE905G - Manual (Page 22)

Preparing and Using the Remote
22
Program ming Other Infrared
(IR) Codes (USER IR setting)
Use the USER IR CODE SETTING menu to program
any IR codes that could not be programed in
"Registering Audio/Video Equipment". These can
include codes for audio and video equipment, as well
as other types of equipment, made by almost any
manufacturer. The following procedure lets you to
program up to 20 USER IR codes.
1 Click FUNCTION in the main menu.
2 Click USER IR.
FUNCTION SELECT
VIDEO 1
VIDEO 2
VIDEO 3
LD
TV/DBS
MACRO 1
-fr
1» EXIT
3 Click A B C D to select a user IR code page, then
click INDEX.
USER IR CODE SETTING,
j A B C D I
I tl RETURN !
JE
4 Spell out a name for the IR code by clicking each
character in order. The name is stored
automatically.
To enter a space
Click the space bar.
To switch between upper and lower case letters
Click CAPS.
If you make a mistake
Click
^
or ^ to move the cursor to the character to be
changed, then dick the correct character (or click the
space bar to erase the character).
5 After entering the name, click RETURN to go back
to the USER IR CODE SETTING menu.
Repeat steps 3 through 5 until you enter the
names of all the IR codes you want to program.
6 Click the name of the first IR code.
USER IR CODE SETTING
A B C D
I
tl RETURN I i» EXIT
Before going to step 7, cover the IR sensor on the
respective equipment to prevent accidental
operation during the programing procedure.
7 Click on START.
When "PUSH YOUR COMMANDER" appears on
the TV screen, press the button you want to
program.
USER IR CODE SETTING
PUSH YOUR COMMANDER
¡CODE CLEAR
I t;
RETURN I
When programing the IR code, point the remote
at the IR sensor on the receiver from a distance no
greater than 4 inches (10 cm) and hold down the
button on the remote for about 5 seconds until the
instruction "RELEASE YOUR COMMANDER"
appears and the IR code setting indicator turns
off.