Sony STR-DE905G - Manual (Page 28)

Basic Operations
5 Click the component you want to record to
("VIDEO 1" for example).
VOL
RECORDER VIDEO 1
VIDEO 2
OAT / MD
TAPE
The control panels for both components appear
on the TV screen. "PLAYER" for the source
component, and "RECORDER" for the recording
component.
The green arrow indicates the selected
component.
6 Insert a blank tape into the recording component
(or VCR, etc.) and adjust the recording level, if
necessary.
7 Click the REC to start recording, then click the
PLAYER ► control.
^Recording begins.
To monitor the recorded sound when recording to a
3-head cassette deck
1 Click EXIT.
2 Click FUNCTION in the main menu.
3 Click TAPE.
To stop recording
Click on ■ of the recording unit.
To return to the main menu.
Click EXIT.
Notes
• There is no sound output from the recording component
even though all the buttons on the recording unit's control
panel are operational.
• If you click on RECORDER during recording, recorder
source will cut-off.
• If you leave the REC EDIT menu by clicking FUNCTION,
SOUND, or EXIT, recording continues, but control returns
to the PLAYER side, even if vou previously clicked
RECORDER.
• if you click on FUNCTION SELECT menu and click on
another program source during recording, new selected
program source will be recorded.
• Some cassette decks require that you press the # REC and
► buttons simultaneously to start recording. To perform
one-button from the on-screen display, be sure to record
the recording signal as shown in steps 1 to 7 of
"Registering non-Sonv audio/video equipment" (pages 19
to 21) for both Sony and m>n-Sony products.
• Sound input through the TAPE connectors on the rear
panel cannot be recorded on a recording unit.
• When vou record on a DAT or .MD connected to the DAT/
MD REC OUT jacks, sound adjustments do not effect the
recording.
To control the recording component
Click on RECORDER.
Click PLAYER to return control to the source
component.
28