Step 2: setting the time, 1 press clock / timer set while the power is off, 2 press+/-to set the hour – Sony DHC-MD333 User Manual
Page 6: 3 press enter / yes or cursor, 4 press + /- to set the minute, 5 press enter/yes, If you have made a mistake, To change the preset time, Tips
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Setting the
time
You must set the time before you can use the
timer functions.
The clock is on a 24-hour system for the
European model, and a 12-hour system for
other models.
The European model is used for illustration
purpose.
C3 Q'
a
o
a
Q a o
.CH3C+3P,
oma
(sma
csraa;
sDoa
C3D® QD
□ as-
(S3g3IO
1
Press CLOCK / TIMER SET while
the power is off.
The clock appears and the hour
indication flashes.
2
Press+/-to set the hour.
3
Press ENTER / YES or CURSOR ■
The minute indication flashes.
4
Press + /- to set the minute.
5
Press ENTER/YES.
The clock starts.
If you have made a mistake
Press CURSOR or ^ repeatedly so that
the incorrect item flashes, then set it again.
To change the preset time
You can change the preset time while the
power is on.
1 Press CLOCK/TIMER SET.
2 Press + / - repeatedly until "CLOCK SET?"
appears.
3 Press ENTER/YES.
4 Repeat steps 2 through 5.
Tips
• The built-in clock shows the time in the display
while the power is off.
• The upper dot flashes for the first half of a minute
(0 to 29 seconds), and the lower dot flashes for the
last half of a minute (30 to 59 seconds).