Sony DHC-MD333 - Manual (Page 37)

Labelling an MD
— Name Function
If you a labelled CD on a new MD, the title is
automatically recorded on the MD (Disc
Memo Copy function). You can also create
titles (names) for your recorded MDs and
tracks. You can use up to 1,700 characters for
a disc.
SCROLL
MD ►W/l
I To label a disc, press MD ■ to stop
playing the disc.
To label a track, press MD or
until the desired track number appears.
2
Press EDIT then press -i-/-
repeatedly until "Name in ?"
appears.
3
Press ENTER/YES.
The cursor starts flashing.
Press CHARACTER repeatedly
until the type of character you want
appears.
Each time you press the button, the
display changes as follows;
A (Upper case) —► a (Lower case) —*■ 0
(Numbers) —* ! (Symbols)*
-►.,(Space)**-^'A...
* You can use the following symbols.
** To enter a space
Go to the step 6. You cannot label a
blank space for the first letter.
5
Press + / - repeatedly until the
character you want appears.
6
Press CURSOR
The character you selected in step 5 stops
flashing and the cursor shifts to the right.
y
fO
O
(b
m
a
3
Repeat steps 4 through 6 to
complete the entire title.
If you enter an incorrect character,
press CURSOR ^ or ^ until the
character you want to change flashes,
then repeat steps 4 through 6.
To erase a character, press
CANCEL/NO while the character is
flashing. You cannot insert characters
between previously inserted characters.
Press ENTER/YES to complete the
labelling procedure.
The titles you labelled appear
sequentially, then the display returns to
the original.
To cancel labelling
Press EDIT.
8
CURSOR continued
37