Getting started, Step 1: hooking up the system, Connect the speakers – Sony DHC-MD333 User Manual

Page 4: Connect the fm/am aerials

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

Getting Started

Step 1: Hooking up the system

Perform the following procedures D to O to hook up your system using the supplied cords and
accessories. To complete the setup, do steps 2 and 3 also.

AM loop aerial

Left speaker

Connect the speakers.
Connect the speaker cords to SPEAKER
terminals of the same colour.
Keep the speaker cords away from the
aerials to prevent noise.

Gray (@)

Connect the FM/AM aerials.
Set up the AM loop aerial, then connect
it.

European model

Extend the FM
wire aerial
horizontally