Using the remote commander, Turning on/off a component, Operating a component – Sony RM-V10A User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VCR
Using the Remote Commander
Turning On/Off a Component
1
Set the slide swifcdi on the Remote
Commander to VCR (to turn on/otf
a VCR), CABLE (to turn on/off a
cable box), or TV (to turn on/off on a
TV).__________________________________
2
PràUdw Commander direedy at the componeid.
3
Press die POWER button to power
on/off the component
(^)
Operating a Component
1
Make sure the slide switch is set to the compeonent you
want to operate.*
2
Pdnt die Commander direedy at the component
3
Press the button for die function you want to use.
See ^Remote Button Descriptions* on page 10 for complete
descriptions of the buttons on the Commander.
» Some buttons on dve Commander work exclusively with
specific components. These buttons also function
independent of die position of die slide switch. For example,
you can use die tape transport buttons (rewind, play, fast-
forward, record, stop, and pause) to control the VCR even if
die
switch is set to TV or CABLE. Fte a
cootqilefe list of
the buttons that work independendy, see the Hghlighted
buttons in die table on the following pages.