Sony RM-V10A - Manual (Page 8)

Searching for the Conrect Code
If you've tried all the code numbers listed for your component
aiid you stQl cannot get №e Commander to work (or if your
componentisnot lisM in this manual), try these steps:
1 Power off the component you want cable
to set up. Then set the slide switch vcW'S^ir-TV
on dte Remote Coaoiunander to VCR
(to set up a VCR), CABLE (to set up
a cable pox ), or TV (to set up a TV).______________
2 Press and release the S (SET) button.
3 Press and release AeC№> button.
Then press aiul release die POWER
butioa
4 Repeat st№ 2 rmtil your component powers on.
Pressing Olf arid POWER repeated^ will try e
CH
0(W)
IR repeated^ will try every
srrect one b found. Be I
available code until foe correct one b found. Be patient as
t may take 50 or 60 tries until foe correct code
5 When foe component powers on,
press and release the ENTER button
to store foe code number in the
Commander's memory.___________
6 ChedcfoatfoeCdmmanderb
opmdng foe other functions of your
component Press the charuwl and
volmne centred buttons. If foe
Commander seems to be working
mxiperly, imu're done setting up foe
Command.
If you still carmot get foe Conunaiuier to work prt^eriy, see
'Troubleshooting* on page 14.