Other setup, Adjusting the position of the touch panel (lcd), Setting the auto power function – Sony RM-TP502 User Manual
Page 24: Changing the function of the system/standby button, Setting the operation sound on or off, Setting the warning aiarm on or off, 1 touch all clear on the setup screen, 2 touch ok
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the Commander's Operating Environment
Other setup
□
SETUP
I ^ FUNCTIOmUSER IR
-»|
ji
FUNCTION
HOOK
up
■»!
f
^
OOHNLDAD -»II
MACRO
■»!
[
touch
PANEL-»||
BEEP ;|0N1 OPE I
([
auto
poher
-»ll^
ALARM; ¡ON] OF
f
|
(
system
STAH08V ■►l|i
ALL CLEAR
'»]
■ Adjusting the position of the touch panel
(LCD)
Adjust the position of the LCD when it shifts from the
normal operating position.
1 Touch TOUCH PANEL on the SETUP screen.
The TOUCH PANEL ADJUSTMENT screen appears.
2 Touch the center of each of the 4 dots.
(For details, see "Touch panel adjustment" on page 6.)
"Adjusted" appears in a short while and long beep is
emitted.
■ Setting the AUTO POWER function
ON:
When a video function (DVD, etc.) is selected, the
commander sends numerous codes to the
appropriate Sony AV components. At this time, the
TV automatically switches to VIDEO 1 input mode.*
Example) When you select DVD, the following
occurs..
1
The receiver switches to DVD player operation
mode.
2 The TV turns on.
3 The DVD player turns on.
4
The TV automatically selects VIDEO 1 input.
OFF:
When a function is selected, the Commander code
applies only to receiver operation.
* Switching to VIDEO 1 input may not be automatic on all Sony
TVs. This is because some TVs cannot receive remote control
codes immediately after being turned on.
■ Changing the function of the SYSTEM/STANDBY
button
ALL OFF:
Switches power of all Sony AV components
off.
ON/OFF:
Switches only the receiver on or off.
■ Setting the operation sound on or off
A beep can be set to sound or not sound when the touch
panel is touchecf.
Touch ON (sound) or OFF (no sound) in BEEPtON
OFF in the SETUP screen.
■ Setting the warning aiarm on or off
A warning alarm can be set to sound or not sound when a
communication error has crccurred.
Touch ON (sound) or OFF (no sound) in ALARM:ON
OFF in the SETUP screen.
■ Returning settings to their factory preset
settings
Use this function to erase all memorized settings and
return them to their factory presets.
Please note that once erased, settings can not be returned.
When carrying out this operation, make sure that the receiver's
power is on, and be sure to point the commander's transmitter/
receiver section toward the display on the receiver.
1 Touch ALL CLEAR on the SETUP screen.
2 Touch OK.
24