Sony RM-TP502 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the Commander's Operating Environment
Registering the connected components
The following procedure lets \ ou setup the component
commander to operate the components connected to the
recei\ er.
When carrying out this operation, make sure that the receiver's
power is on, and be sure to point the commander's transmitter/
receiver section toward the display on the receiver.
1
Touch SETUP.
The SETUP screen appears.
2
Touch FUNCTION&USER IR.
The FUNCTION&USER IR screen appears.
£ FUNCTION&USER IR
_______________________±_________________________
VIDEOl :
Sony VTR3
VIDE02:
Sony VTR2
VIDEQ3:
JVC VTRl
DVD/LD:
Pioneer DVD
TV/SAT:
Sony TV
r
^
I
Select the function that you wish to register (Ex;
VIDE01).
To display other items, use the JOG DIAL or touch ▲
or
T
to scroll through the list.
The FUNCTION&USER IR:CATEGORY screen
appears.
X
FUNCIIONItUSER IR: CRIEGORV
îOUN['
I
VCR
TV
LD
DVD
VIDEO CD
Select the type of component connecteci (Ex: VCR).
T(^ display other items, use the jOG DIAL or touch ▲
or ▼ to scroll through the list.
The EUNCTlON&rUSER IU:MAKER CODE screen
appears.
^ FUNCTlONliUSER IR: HAKER CODE
SOUND
FIELD I Sony VTRl
Sony VTR2
Sony VTR.3
Admiral VCR
Aiwa VCR-1
5
Touch the remote controller mode of the connected
component (Ex: Sony VTR1).
The component selected in steps 4 to 5 will be
registered at the function selected in step 3, and the
SETUP screen reappears. A long beep sound is emitted
to indicate that registration was successful. Operation
is now possible from the FUNCTION screen.
If a series of short beeps is emitted, redo the
registration procedure. If this occurs, make sure the
receiver is turned on and that the commander is
pointing toward the receiver during operation.
To stop registration at any time
Touch EXIT during step 2 or touch CANCEL during steps 3 to 5.
Notes
• All icons may not be displayed when registering components
made by certain manufacturers.
• Some commands may not function even though they are
displayed when registering components made by certain
manufacturers.
20