Sony RM-TP502 - Manual (Page 16)

Performing Several Commands in Sequence Automatically
(Macro Play)
The Macro Play function lets you link se\eral IR codes in
sequential order as a single command. The remote
provides 3 macro lists (MACRO 1, 2 and 3). You can
specify up to 10 IR commands for each macro list.
1 Touch FUNCTION.
The FUNCTION screen appears.
Notes
• For some mixiels, the receiver cannot operate the Macro Plav
commands as the time between each command is tint short. In
this case, set "WAIT TIME" between each command. To set
"WAIT TIME", refer to "Macro Play setting" on page 22 and 23.
• For some makers other than Sony, there are some commands
that cannot be used in Macro Play.
Touch
The MACRO screen appears.
The FUNCTION screen can only display up to II
functions. Therefore, you may not find MACRO in the
screen. In this case, set FUNCTION HOOK UP of
other functions to NO and MACRO to YES.
BOX Number
Send key
IMACROI si4in
LA 71
POUIER 1
1
}
IB
in
Command ^ .. .
Condition
Category SENDING: Outputting the
command
Done!: Outputting is
finished
• Touch SEND to operate Macro Play. The current command
is displayed in black. The finished commands are grayed
out.
' To cancel Macro Play, touch CANCEL. When Macro Play is
not operating, touching CANCEL returns to the
FUNCTION screen.
16