Sony DVP-C600D - Manual (Page 8)

Getting Started
If you have a digital component such as an amplifier
with a digital connector, DAT or MD
Conncit the amiponent vi,i the DlCn’Al. OU T OI'TICAI,
or COAXIAI, connector usini; on opiicol or cooxiol digit,i!
connecting cord (not supplied).
When you play a DVD, set^DIGITAL OUT" in "INITIAL
SETUP 2" to "PCM" in the setup display, (page 39)
■ When using an optical digital connecting cord
Optical digital connecting cord
4 Q 3 ----------------------- ^
(not supplied)
Q If your TV has an S-link connector
You c,in control the CD,/ IT\'D phiyer from the TV.
C<*nnect tire d'V vi,i tire S-ldNK connector using the S-link
c.ible (supplied). Refer to the instructions supplied with
the rV to be connected.
Audio/Video/S-link connecting
cord (supplied)
S-link S-link
Take off the cap and plug in the optical digital connecting
cord.
CD/DVD player
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
CD/DVD player TV
When using a coaxial digital connecting cord
Coaxial digital connecting cord
(not supplied)
CD/DVD player
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
Refer to the instructions supplied with the component
to be connected.
You cannot make digital audio recordings of discs
recorded in Dolby Digital (AC-3) format directly using
an MD deck or DAT deck.
When you make the connections above, do not set
"DIGITAL OUT" in "INITIAL SETUP 2" to "DOLBY
DIGITAL/PCM." If you do, a loud noise will
suddenly come out from the speakers, affecting
your ears or causing the speakers to be damaged.
8
Transporting the player
Before transporting the player, follow the procedure
below to return the internal mechanisms back to their
original position.
1 Remove all the discs from the disc tray.
2 Press
— to close the disc tray.
"NO DISC" appears in the display.
3 Wait for 10 seconds, then press I / Cl) to turn off the
player.