Speaker placement, Note, Speaker set up – Sony DVP-C600D User Manual
Page 42: Specifying the speaker type, Front speaker, center speaker, or rear speaker, Sub woofer, Notes, Speaker setup, Dolby digital surround
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Dolby Digital Surround
Speaker Placement
For the best possible surround sound, we recommend
the following conditions.
• Use higher performance speakers.
• Use rear and center speakers that match your front
speakers in size and performance.
• All speakers should be the same distance from the
listening position.
• Place the subwoofer between the front (L, R)
speakers if possible.
Note
Do not place the center or rear speakers farther away from the
listening position than the front speakers.
Speaker Set Up
To obtain the best possible surround sound, first
specify the type of speakers you have connected and
their distance from your listening position. Then use
the test tone to adjust the speaker volumes to the same
level.
ENTER
Specifying the speaker type
1
Press SET UP and select -|," then press ENTER.
2
Select the speaker you want to adjust in
"SPEAKER SETUP" and press ENTER.
3
Select the appropriate symbol for the speaker, then
press ENTER.
■ Front speaker, Center speaker, or Rear speaker
Generally, if you are utilizing large, full-range
(large)
speakers that effectively reproduce bass
frequencies, select this symbol. This is default
setting.
A If you are utilizing small speakers with rninimal
(small)
bass response, select this symbol.
&
If you will not connect the speaker, select this
symbol. You carmot select this symbol for the
front speakers.
The above speaker selections will activate the Dolby
EHgital bass redirection circuitry and output the bass
frequencies to the appropriate speakers.
■Sub woofer
1^ If you connect a sub woofer, select this symbol
to output the LEE (low frequency effects)
channel from the sub woofer. This is default
setting.
;J( i If you do not connect a sub woofer, select this
symbol. This activates the Dolby Digital (AC-3)
bass redirection circuitry and outputs the LEE
signals from other speakers.
Notes
• The cut off frequency for the subwoofer is fixed at lOOHz.
• Set the subwoofer's cut off frequency as high as possible.
• Depending on the settings of other speakers, the subwoofer
may output excessive sound.
• The bass management options provided by the bass
redirection circuitry in this player will optimize system set
up based on total system configuration selected. In some
instances, independent speaker selections might be changed
to reflect the most optimum multi-channel sound
experience.
• If your speakers are too small to reproduce low bass
frequencies, please set all speaker setting to " A" (small)
and utilize a subwoofer for low frequency sound.
42
5 . 1 O U T P U T S E T U P 1
S P E A K E R S E T U P
D I S T A N C E
0 0 0 0 * i g
Q U I T
Symbol
Note
When you select a symbol, the sound cuts off for a moment.