To display the playing channels, Current, The case of dolby digital (ac-3) 5.1 ch – Sony DVP-C600D User Manual
Page 45: Rear component 2, Front component 2 + center component 1, Note, Cd [s e, Ed [c] el, C] el, Dolby digital surround
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Dolby Digital Surround
To display the playing channels
You C(in disphi\' the pl¿lying channels on tine screen.
In Dolby [Digital (AC-3) format, the signals from
monaural to 5.1 channel can be recorded on a DVD.
Depending on the DVD the numbers of the Tecorded
channels are different.
0 CD CE. Q)
0 0 0 Q 0 ,
© ® © 1.0 Q
©
©
©
CD
CD®
OOCD
O O C D O O
DISPLAY
Press DISPLAY repeatedly until the channel display
appears.
DVD
DISC
TITLE:
CHAPTER:
SUBTITLE:
AUDIO:
ANGLE:
P L A Y ^
1
32 ; 55
32 ( 50 )
30 ( 50 )
ENGLISH (
32
)
ENGLISH ( 8 )
fPOiMiGifir^ 2. 1 V
1 ( 9 )
CD [S E]
Current
audio
format*
Current
playing
channel*
"PCM" or "DOLBY DIGITAL" is displayed. In
"DOLBY DIGITAL" case, the channels in the
playing track are displayed by number as follows:
The case of Dolby Digital (AC-3) 5.1 ch:
Rear component 2
DOLBY DIGITAL [|] /
É- E
Front component 2
+ Center component 1
LFE component 1
II "S" is cfispl.p'cd in grn\', vou can enjoy the surround
ellect when \'Ou set "MCDDL" under ".5.1 OUTPUT
SETUP 2" to "PRO LOGIC," "VPS A" or "VPS B" in
the setup display, this altects only wlien the current
audio fornral is "DOLBY DIGITAL 2/0."
The display examples are as follows:
•PCM (stereo)
AUDIO:
ANGLE:
ENGLISH ( 8 )
PCM
m
PRO LOGIC (PCM)
AUDIO:
ANGLE;
ENGLISH ( 8 )
PCM
1 ( 9 )
___ , PRO LOGIC
ED [c] El
E]
Dolby Digital (AC-3) S.lch
AUDIO:
ANGLE:
ENGLISH ( 8 )
DOLBY DIGITAL 3 / 2. 1
1 ( 9 )
[□ [c] El
'9' You can find Dolby Digital encoded software by
looking at the packaging
Use discs with the
logo. In order to enjoy Dolby
Digital (AC-3) playback you must use discs bearing this
logo.
Note
The DOLBY DIGITAL indicator turns off when:
- you insert a CD or a VIDEO CD.
- the current audio format is PCM or MPEG Audio.
The playing charmel shows the signals from 5.1CH
OUTPUT connectors on the assumption that five
speakers are connected to the amplifier. The letters
in the channel display mean the following:
L:
Front (L)
R:
Front (R)
C:
Center (monaural)
LS:
Rear (L)
RS:
Rear (R)
S:
Rear (monaural sound comes from both
of the left and right rear speakers)
LFE:
- displayed only when the LFE (Low
Frequency Effects) signal is playing
45