Sony DVP-C600D - Manual (Page 6)

Getting Started
Unpacking
Check that you have the following items;
• Audio/video/S-link connecting cord (1)
• S video cable (1)
• Remote commander (remote) RMT-D104A (1)
• Size AA (R6) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and
- on the batteries. When using the remote, point it at
the remote sensor S on the player.
'Q You can control TVs and Sony AV receivers using the
supplied remote
See page 33.
Notes
• Do not leave the remote in an extremel\- hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of
time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
Hooking Up the System
Overview
This section describes how to hook up the CD/DVD
player to a TV (with audio/ video input jacks) and/or
an amplifier. You cannot connect this player to a TV
without a video input connector.
Be sure to turn off
the power of each component before making the
connections.
■To listen to the sound through TV speakers (2ch - L,R)
CD/DVD player
■ To listen to the sound through speakers connected to
an amplifier (receiver) (2ch - L,R)
CD/DVD player
■ To enjoy Dolby Digital surround sound by connecting
the player to an amplifier with 5.1 channel inputs
See page 40.