Checking the recorded picture in the viewfinder, To stop playback, To begin re-recording – Sony CCD-TR500 User Manual

Page 10: Connachnd to a tv without vmeo/audlo input jacks

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Camera Recording

Connections for Playback

Checking the Recorded Picture in the Viewfinder

Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the viewfinder.
(1) Set the POWER switch to CAMERA. (2) Open the STANDBY cover. (3) Press EDITSEARCH. Press the -
(©) side rnomentarily, the last lew seconds of the recorded portion plays back (Rec Review).
Keep pressing EDITSEARCH to play back the last recorded portion (Edit Search).
+ side: to view the forward playback picture
- side: to view the reverse playback picture

Monitoring the Sound While Viewing the Playback Picture in the Viewfinder

Connect headphones (not supplied) to the PHONES jack Play back the tape in VTR mode (p.22).

To Stop Playback

Release EDITSEARCH.

To Begin Re-recording

Press START/STOP Re-recording begins trom the point you released EDITSEARCH. Provided you do not
eject the tape, the transition between the last scene you recorded and the next scene you record will be
smooth.

You can use this camcorder as a VCR by connecting it to your TV for playback. There are some ways to
connect your camcorder.
• Connecting to a TV with Video/Audio input jacks or a VCR (p.19)
• Connecting to a TV without Video/Audio input jacks (p-t9)
• Connecting to a TV or VCR using the Handycam Station (for the Canada model)(p.20)

Connecting to a TV with Vldeo/Audlo Input Jacks or a VCR

Connect the camcorder to your TV by using the supplied connecting cable. Set the TVA/CR selector to VCR
on the TV When Connecting the camcorder to VCR, set the input selector on the VCR to LINE.

If you are going to connect the camcorder using the S video cable [aj, you do not need to connect the yellow
(video) plug of the A/V connecting cable {bj.

^ s-vioeo I

VIDEO '

:Signal flow

If youT TV or VCR is a monaural type, connect only the white plug for audio on both the camcorder and the TV
or the VCR. With this connection, the sound is in monaural.

ConnacHnd to a TV without VMeo/Audlo Input Jacks

Connect the camcorder to the TV using the supplied RFU adaptor. Set the channel selector on the RFU

adaptor and your TV channel to VHF channel CH 3 or CH 4, whichever is not active in your area. With this
connection, the sound is in monaural.