Sony SPP-A973 - Manual (Page 56)

Troubleshooting (continued)
Symptom Remedy
The caller’s name and/or
phone number does not
appear on the display during
call waiting. • Make sure you have subscribed to "Caller ID with call
waiting" service (page 51).
• Make sure nobody is talking with another phone on
the same telephone line.
You cannot dial the number
from the Caller ID list. Make sure you entered your home area code correctly
(page 14).
You may need to change the number of digits of the
phone number (page 49).
This function may not work when the phone is
connected to a Private Branch Exchange (PBX).
The memory match function
does not work. If the call is from an office which uses multiple lines,
the phone number may not match the number you
put in the memory.
If you have stored the phone number with an outside
line access digit in the Phone Directory because the
phone is connected to a Private Branch Exchange
(PBX), the phone number will not match the O^er ID
data.
o;
tí
The CHARGE lamp does not
light up when you place the
handset to charge. Wipe the charge terminals of the base unit and the
handset with a soft cloth for better contact of the
charge terminals.
Make sure the handset is placed on the base unit
properly.
S The battery duration is short,
V
5
o
The battery pack was charged less than 12 hours (due
to power failure, etc.).
The usage life of the battery has expired and needs
replacement.
Message counter
The message counter on the base unit shows the following information.
When the counter shows It means
I lashing numbor Number of messages not yet played back.
ft. Flashes when the day and time is cleared or delayed due to a
ptTwer interruption, or when you cormect the base unit to the
AC outlet for the first time. Reset the time correctly (page 30).
A The announcement only mode is selected (page 38).
} The recording area is full. Erase unnecesary messages (page 37)
56‘'' I Additional Information