Basics, Making calls – Sony SPP-A973 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basics
Making calls
2
1
Pick up the handset from the
base unit.
3
4
Press (TALK) and wait until
"TALK" appears on the display.
The display also shows the
operation duration in hours,
minutes and seconds.
You will then hear a dial tone.
The IN USE lamp on the base
unit lights up.
If "CHANNEL SEARCHING"
appears on the display, move
closer to the base imit.
Dial the phone number.
When you're done talking, presi
(OFF) or replace the handset on
the base unit.
The display and the IN USE
lamp on the base imit go off.
Additional tasks
To
Do this
Adjust the handset volume
Set the VOL switch to H (high), M (middle) or L
(low).
Switch to tone dialing
temporarily
Press (*TONE
) after vou're connected.
The line will remain in tone dialing until
disconnected.
Notes
• When you increase the sound volume, in some cases the back ground noise
may be increased as well. You should adjust the volume accordingly.
• If your conversation is muted and "CHANNEL SEARCHING" appears on
the display, move closer to the base unit; otherwise, the call will be
disconnected after one minute.
20^
Basics