Sony SPP-A973 - Manual (Page 52)

Additional Information
Mounting the base unit on a wall
1
2
-Telephone
line cord
4
5
Raise the hang-up tab.
Plug the telephone line cord to
the LINE jack and the AC power
adaptor to the DC IN 9V jack,
and hook the cords. Use tire
shorter cord for mounting.
Attach the wall bracket to the
center of the base unit.
Align the A marks of the wall
bracket with those of the base
unit.
Plug the telephone line cord to
the telephone outlet, and hook
the base unit to the wcill plate.
Plug the AC power adaptor to
an AC outlet. Then raise the
antenna so that it points
towards the ceiling.
AC outlet
Telephone
line cord
AC power
adaptor
Tip
To remove the wall bracket, press the lower tabs.
52“ I
Additional Information