To change the local area code, To erase the local area code – Sony SPP-A973 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 4: Entering the area code (continued)
5
Press Jog Dial.
"ENTER AREA CODE" appears on the display.
6
Enter three digits of the local area code using the dialing
keys.
7
Press
(PGM).
You will hear a long confirmation beep.
Notes
• It the kxrnl area is already entered, it appears on the display in step 5. To
enter a different ItKal area code, see "To change the local area code" below.
• Do not allow mt>re than 20 seconds to elapse between each step of the
priK’edure.
Tips
•
may press jog Dial instead of C PGM) in step 7.
• To check the current kval area axle, perform steps 1 to 5. The local area code
appears on the display for about 20 seconds.
To change the local area code
1
Perform steps 1 to 5 on page 15.
The current local area code appears on the display.
2
Turn Jog Dial down to erase the current local area code.
3
Enter a new local area code using the dialing keys.
4
Press
(PGM).
You will hear a long confirmation beep.
To erase the local area code
You can erase the liKal area axle. Perform steps 1 and 2 above, then
pre.ss (
PGM).
The local area code will be erased, and you hear a long confirmation
beep.
16“ I Getting Started