Sony CCD-TR400 - Manual (Page 6)

9KW i«U
Charging and Installing the Battery Pack
Before using your camcorder, you first need to charge and install the battery pack. To charge the
battery pack, use the supplied AC-V25/V25A/V25B/V25C AC power adaptor.
Charging the Battery Pack
Charge the battery pack on a flat place without vibration.
(1) Connect the AC power adaptor to a wall outlet.
(2) Align the right side of the lottery pack with the line on the AC power adaptor, then slide the
battery pack in the direction of the arrow.
(3) Set the selector to CHARGE. The CHARGE lamp (orange) lights up. Charging begins.
When charging is completed, the CHARGE lamp goes out. Set the selector to the center position and
unplug the unit from the wall outlet. Then remove the battery pack and install it on the camcorder. To
stop charging, set the selector to the center position.
Qiarging Time
Battery pack NP-55
(supplied)
NP-80/80D NP-77H NP-66H NP-60D NP-55H
Charging time* 70 ISO 160 120 90 80
* Approximate minutes to charge an empty battery pack using the AC-V25/V25A/V25B/V25C
(Lower temperatures require a longer charging time.)
Battery Life
Battery pack NP-55 NP-S0/80D NP-77H NP-66H NP-60D NP-55H
Typical recording time** 30 85 75 55 40 35
Continuous recording time*** 55 165 145 105 75 65
Approximate minutes when recording while you repeat recording start/stop, zooming and turning
the power on/off. The actual battery life may be shorter.
Approximate continuous recording time indoors.