Ac power adaptor, When the charge lamp flashes – Sony CCD-TR400 User Manual

Page 44

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

AC Power Adaptor

Symptom

Cause

Corrective Actions

Pag*

The POWER lamp does not

light.

—

Set the selector to the center position and
disconnect the power cord. After about
one minute, reconnect the pc>vs er cord

and set the selector to CHARGE again.

< •

The CHARGE lamp flashes.

See the following chart.

When the CHARGE Lamp Flashes

Check through the following chart.

If you use a battery pack which you have just bought or which has been left unused for a long time,
the CHARGE lamp may flash at the first charging. But this is not a problem. Repeat again to charge

with the same battery pack.