Remote commander, T| transmitter, D tape transport buttons (p.16) – Sony CCD-TR400 User Manual

Page 49: M display button (p.17), Preparing the remote commander, Note on battery life, To avoid damage from possible battery leakage

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Remote Commander

The buttons that have the same name on the Remote Commander and on the camcorder function
identicallv.

[T|

Transmitter

Point toward the remote sensor to control the

camcorder after turning on the POWER

switch on the camcorder.

[D Tape transport buttons (p.16)

m DISPLAY button (p.17)

[S Size AA (RS) battery holder

[D START/STOP button

(D Power zoom button

The zooming speed is unchangeable on the

Remote Commander.

Preparing the Remote Commander

To use the Remote Commander, you must insert two size AA (R6) biUteries. Use the supplied size AA

(R6) batteries.

(1) Remove the battery cover from the Remote Commander.

(2) Insert both of the size AA (R6) batteries with correct polarity.
(3) Put the battery cover back onto the Remote Commander.

I»

Note on battery life

The battery for the Remote Commander last about 6 months under normal operation. When the

batteries become weak or dead, the Remote Commander does not work.

To avoid damage

from

possible battery leakage

Remove the batteries when you will not use the Remote Commander for a long time.