Recording from a tv or vcr, To stop recording – Sony CCD-TR400 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording from a TV or VCR
You can record a tape from another VCR or a TV program from a T/ that has video/audio outputs.
Connect the camcorder to the TV or VCR.
(1) Set the POWER switch to VTR.
(2) Press REC 9 and the button on the right together at the point where you want to start recording.
In recording and recording pause mode, S VIDEO and VIDEO/AUDIO jacks automatically work as
input jacks.
TV
S VIDEO OUT
VIDEO OUT
AUDIO OUT
: Signal flow
If your TV or VCR is a monaural type, connect only the white plug for audio on both the camcorder
and the TV or VCR.
If you are going to connect the camcorder using the S video cable, you do not need to connect the
yellow (video) plug of the A/V connecting cable.
To Check the Picture from a TV or VCR before Recording
Press
II
after pressing •. You can check the picture in the viewfinder.
To Stop Recording
Press □.
a.
S
3
lO
0
1
I
1»
I
I
3,
lO
i
3
§
31