Editing onto another tape, Before editing, Starting editing – Sony CCD-TR400 User Manual

Page 30: To edit more scenes, To stop editing

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Editing onto Another Tape

You can create vour own video program by editing with any other Ш 8 mm, МШ Hi8, VK5 VHS,

*VHS S-VHS, TO® VHSC, *ша S-VHSC, or IB Betamax VCR that has video/audio inputs.

Before Editing

After connecting the camcorder to the VCR,

(1) Slide the TOWER switch to VTR.
(2) Set EDIT mode to ON in the menu system to minimize the picture deterioration (p.26).

Starting Editing

(1) Insert a blank tape (ora tape you want to record over) into the recording VCR. Then insert your
recorded tape into the camcorder.
(2) Play hack the recorded tape on the camcorder until you locate the point where you want to start
editing. Then set the camcorder to playback pause mode.
(3) Set the recording VCR to recording pause mode.

(4)

Press

on the camcorder and VCR simultaneously to start editing.

To Edit More Scenes

Repeat steps 2 to 4.

To Stop Editing

Press □ STOP on the camcorder and VCR. When you finish editing, reset EDIT mode to OFF (p.26).

Use of the EDITSEARCH button

To play back a tape in the forward or reverse direction keep pressing EDITSEARCH during playback

pause. You can play back still pictures successively at specific intervals by pressing EDITSEARCH

intermittently.

Note on DISPLAY function

If you have displayed the viewfinder screen indicators on the TV (DISPLAY function), erase the

indicators by pressing DISPLAY on the Remote Commander so that they will not be superimposed on
the edited tape.