Unpacking, Inserting batteries into the remote, Notes – Sony DVP-C650D User Manual

Page 7: Transporting the player, 1 remove all the discs from the disc tray, 2 press ± to close the disc tray, Getting started

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Getting
Started

This section describes how to hook up
the CD/DVD player to a TV (with

audio/video input jacks) and/or an
AV receiver (amplifier). You cannot
connect this player to a TV which
does not have a video input
connector. Be sure to turn off the
power of each component before
making the connections.

Unpacking

Check that you have the following items:

• Audio/video/S-link connecting cord (1) or Audio/

video connecting cord (1)

• S video cord (1)
• Plug adaptor (1) (except for the USA/Canada models)
• Remote commander (remote) RMT-D112A (1)
• Size AA (R6) batteries (2)

Inserting batteries into the remote

You can control the player using the supplied remote.
Insert two Size AA (R6) batteries by matching the + and -
on the batteries. When using the remote, point it at the
remote sensor @ on the player.

remote

See page 61.

Notes

• Do not leave the remote in an extremely hot or humid place.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct sunlight or lighting

apparatuses. Doing so may cause a malfunction.

• If you will not use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery

leakage and corrosion.

(fi

Transporting the player

Before transporting the player, follow the procedure
below to return the internal mechanisms to their original
positions.

Remove all the discs from the disc tray.

Press

to close the disc tray.

Make sure that “NO DISC" appears in the front panel
display.

3 Wait for 10 seconds, then press 1/(1) to turn off the

player.