Sony DVP-C650D - Manual (Page 12)

5.1 Channel Surround Hookups
3
3
IQ
ai
3.
le
a
Sonu’ DVDs h>iv(.' a sound track with up to 5.1 channels
recorded in Dolh\ * Digital format. Using a receiver
(amplifier) having 5.1 channel inputs and the 5 (+1)
speakers, vou can eiijov more real audio presence in the
comfort of vour own home,
"5 channel" stands for the 2 front speakers (Left and
Right), 2 rear speakers (Left and Right) and 1 center
speaker. The "0.1 channel" (+1) stands for the subwoofer
which outputs the bass.
Even if \ ou have fewer than 5 (+1) speakers, the plaver
distributes the output signal to the speaker's appropriately.
This player has VIRTUAL 3D SURROUND mode.
You can itse the 3D sound imaging to shift the sound of
the rear speakers awav fror'n the actual speaker position
(VIRTUAL REAR SHIFT) or to create 3 sets of virtual rear-
speakers from 1 set of actual rear speakers (VIRTUAL
MULTI REAR). For details on the VIRTUAL 3D
SURROUND mode, see page 42.
Speaker placement
For the best possible surround sound, we recommend the
following conditions.
• Use higher performance speakers.
• Use rear and center speakers that match your front
speakers in size and performance.
• All speakers should be the same distance from the
listening position.
• Place the subwoofer between the front (L, R) speakers if
possible.
Notes
• Dti not connect the power cord ti.' an .\C i.>iitlet or press tht‘
I’UtW'Rc su itch before completing all connections.
• The cord connectors should be fulK inserted into the jacks.
Loose connectiwi max' cause hum and noise.
• jacks and plugs vit the connecting axrds are ciilor-coded as
follows:
Red jacks and plugs: Right audio channel
White jacks and plugs: Left audio channel
't oil can use either red or white cabkes to connect the center
speaker and subwoofer.
• When x'ou connect the component \ ia the DIGITAL OUT
OPTIC.AI or COAXIAL connector using optical or ai.ixial
digital connoctinp cord (not supplied), see prii;e 11,
Setups for the player
Some setups are necessary for the plax'er depending on
the components to be connected.
Use the setup display or the Control Menu display to
change the various settings.
For details on using the setup display, see page 49.
For details on enjoying Digital Cinema Sound, see page
42.
• To enjoy Dolby Digital surround sound by
connecting the player to a receiver (amplifier) with
5.1 channel inputs
Set each speaker position or distance, etc. See page 59.
Note
Do not place the center or rear speakers farther away from the
listening position than the front speakers.
Required cords
Audio cords (not supplied)
Two for the 5.1CH OLTPUT PRONT and RLAR jacks
White (L)
Red (R) White (L)
Red (R)
Monaural audio cords (not supplied)
Tvx'o for the 5.1CH OLTPUT CT.XTPR and WOOPLK jacks
Black Black
S video cord (supplied)
Oiu' tor the S VIDPO OL'l jacks
-4T.T, .Vlanufactured under license from Dolby l.aboratories.
“Uolbv," "Pro Logic" and tire double-D symbol □ □ ai''
Irademarks of Dolby I aboratories.
C onficiential Lnpiihlished Works 'Ll 9P2-1PP7 Dolby
I .aboratories, Inc, .All rights reserx'ed.
1 2