Sony DVP-C650D - Manual (Page 58)

Settings for Sound (AUDIO SETUP)
V)
(0
3
(fi
Ul
ID
3
a
>
a
c'
VI r*
3
I»
3
■ DOWNMIX*
Switches the mixing down methods when von plav a
DVD on wliich the sound in Dolb\- Digital format is
recorded.
• DOLBY SURROUND: when the plaver is connected to
an audio component tliat conforms fo Dolb\' Surround.
(Pro Logic)
• NORMAL: when the plaver is connected to a normal
audio component.
The sotting affects the following connectors: *
-LINT OUT (AUDIO 1,2) connectors
DICITAl OUT (OPTICAL, COAXl.AL) connectors.
■ DIGITAL OUT
Selects output signals via the DIGITAL OUT OPTICAL
and COAXIAL connectors.
• ON: Normally select this position. When you select
“ON," set "DOLBY DIGITAL" and "DTS." For details
on setting them, see "Setting for the Signal to the Digital
Output "
• OFF: when the player does not output the sound signals
via DIGITAL OUT OPTICAL and COAXIAL connectors,
if you selecf this position, the influence of the digital
circuit upon the analog one is minimum.
Notes
• When you play the sound tracks with 96 kHz sampling
frequency, the output signals from the DIGITAL OUT
(OPTICAL, COAXIAL) are converted to 48 kHz (sampling
frequency). When the signals are output from LINE OUT
(AUDIO 1, 2) connector, sampling frequency stays at 96 kHz.
and the output signals are converting to analog signals.
• When you select "OFF," You cannot set "DOLBY DICITAL.”
and "DTS."
Setting for the Signal to the Digital
Output
When vou select "ON," set "DOLBY DIGITAL" and
"DTS."
Switches the methods of outputting audio signals when
vou connect a digital component such as a receiv er
(amplifier) having a digital connector, an audio
component having a built-in DTS decoder, a D.AT or MD
via the DIGITAL OUT OPTICAL or COAXIAL connector
using an optical or coaxial digital connecting cord. For
details on the connection, see page 11.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO FILTER: SHARP
AUDIO DRC: STANDARD
TRACK SELECTION: OFF
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
ON
DOLBY DIGITAL: D-PCM
DTS: OFF
To set, Dress SSHIIS, thenlENiEfiJ.
To quit, pressiSETUPl.
■ DOLBY DIGITAL
Selects output Dolby Digital signals via the DIGITAL OUT
OPTICAL and COAXIAL connectors. You cannot select
this item when you set "DIGITAL OUT" to "OFF."
• D-PCM (Downmix PCM): when you play the Dolby
Digital sound tracks, the output audio signals are mixed
down to 2 channels. With the settings of the item
"DOWNMIX" in "AUDIO SETUP," you can select
whether the signals conform to Dolby Surround (Pro
Logic) or not.
• DOLBY DIGITAL: when the player is connected to an
audio component with a built-in Dolby Digital decoder.
Note
If fhc pkivcr is connected to an audio cornponent lacking a
built-in DoIb\' Digital decoder, do not set "DOLBY DICITAL"
in "AUDIO SETUP" to "DOLBY DICITAL," Otheru ise, when
vou play tire Dolbv Digital sound track, a loud noise or no
sound v\ ill conu' out froirr the speakrTs, affecting vour ears or
causing the speakers to be damaged.
58