Sony CCD-TR7 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CbtMlttttBn tor MaybMk
Type 2: Connecting to a TV without
Video/Audio Input Jacks
Connecting the camcorder, the RFU adaptor
(RFU-90 UC, supplied), and the TV.
1
Connect the RFU adaptor to the camcorder.
2
Connect the VHF/UHF antenna to the RFU
3
Connect the RFU adaptor to the TV.
4
Set the INPUT/OUTPUT selector on the
camcorder to OUTPUT.
Selection of the TV channel to monitor the
camcorder playback.
1
Set the RF unit selector on the RFU
adaptor to either channel 3 or 4, whichever
is not actWe in your area.
2
Select the same channel on the TV.
Whenever playing back a tape, be sure to set
the TV to the channel that you have selected
in step 2.
Note
With this connection, the sound wilt be in
monaural.
: Signal flow
50
Type 3: Connection to a TV via a VCR
with an Input Selector
(P-4)
1
Connect the camcorder to the VCR using
the supplied AV conneclirtg cable.
• If your VCR is a monaural type, connect
only the white plug for audio both on the
camcorder and the TV. Do not use the
red plugs.
• You will have stereo sound if your TV
and VTR are stereo, however If one Is
monaural the sound will be monaural.
2
Set the INPirr/OUTPUT selector on the
camcorder to OUTPUT.
3
Set the input selector on the VCR to LINE
eitd set the TVrVTR selector on the TV to
VTR.
51