Sony CCD-TR7 - Manual (Page 11)

(E-1)
1 Make sure a power source Is connected.
2 IMhlte stkltng the lid lock In the direction ol
the arrow lit! up the lid until it dicks.
3 Press EJECT-
The lip of the cassette compartment will
automatically lift up and open.
4 Insert the cassette with the window lacing
5 Press the PUSH mark on the cassette
compartment cover to dose It.
6 Close the lid.
Ejecting the Tape
1 Make sure that a power source Is
connected.
2 While sliding the lid lock In the direction of
the arrow, lift the lid up until it clicks.
3 Press the EJECT.
The l/p of the casseKe comparlmenf will lifl
up and automatically open.
4 Take out the cassette and press the PUSH
mark on the comparment to close It.
5 Close the lid.
22
(E-2)
№•2)
Slide out the red tab on the cassette to protect
the recording.
To re-record on this tape, slide the tab back in.
Notes on hendllnp tapes
•
Insert anything in the small holes orr trie
rear ol the cassette. These holes are used to
sense the type ol tape, thickness of tape, or if
the tab is out or in, etc.
» Store tapes in their cases and keep them in an
upright position to prevent intrusion of dust and
uneven winding. __________
23