Sony CCD-TR7 - Manual (Page 21)

Cl0M>Up (Macro)
Even tiny subjects, such as flowers, insects,
and photographs, can literally fill the screen.
(M-1)
1 Turn the zoom lever to the MACRO
position, pressing the green macro set
button.
2 Bring the camcorder as close as necessary
to obtain the desired size ol Image.
The subject can be as close as a minimum
of 10 mm (7/16 in.) from the lens surface.
3 Turn the zoom lever within the MACRO
rartge to focus sharply.
In the MACHO range, auto-focusing does not
function.
holes
• When shooting in macro, the depth of field is
very shallow. So pay attention to focusing. To
keep the subject in focus, use a tripod,
• II the subject Is closer than 10 mm (7/16 In.), It
cannot be brought Into focus.
42
Fade-In and Fade-out
(N-1)
I FADE IN I
When fading-in, the picture will gradually
appear from a black screen. The sound will
also gradually increase.
When fading-out, the picture will gradually
disappear to a black screen. The sound will
also gradually decrease.
This function will give your recording a
professional appearance. (N-1)
1 Slide STANDBY up to set the camcorder In
the standby mode.
2 Press FADER.
The "FADER" indication appears In the
viewfinder.
3 Press STARTfSTOP.
Fade-in is performed and then recording
will start.
1 While recording, press FADER.
The "FADER" indication appears in the
viewfinder.
2 Press START/STOP to stop the recording.
Fade-out is performed and then recording
stops.
To cancel the tade-ln/fade-out function before
ft Is perfonned
Press FADER again before pressing
START/STOP.
If you want to use the fade ln/lade-out function
repeatedly
Start from step 1 each lime.
43