I additional information, Información complementaria, Charging the vanadium- lithium battery in the vcr – Sony GV-A500 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Additional information
Charging the vanadium-
lithium battery in the
VCR
Información complementaria
Carga de la pila de
vanadio-litio de la
videograbadora
Your VCR is supplied with a vanadium-lithium
battery installed so as to retain the menu settings,
regardless of the setting of the POWER switch.
The vanadium-lithium battery is always charged
as long as you are using the VCR. The battery,
however, will get discharged gradually if you do
not use the VCR. It will be completely
discharged in about 1 year if you do not use the
VCR at all. Even if the vanadium-lithium battery
is not charged, it will not affect the VCR
operation. To retain the menu settings, charge
the battery if the battery is discharged. The
following are charging methods:
•
Connect the VCR to a wall outlet using the
supplied AC power adaptor, and leave the VCR
with the POWER switch turned off for more
than 24 hours.
• Install the fully charged battery pack on the
VCR, and leav'e the VCR with the POWER
switch turned off for more than 24 hours.
La videograbadora se suministra con una pila de
vanadio-litio instalada para conservar los ajustes
de menú, independientemente del ajuste del
interruptor POWER, Dicha pila siempre está
cargada en tanto se utilice la videograbadora. No
obstante, se descargará gradualmente si no
utiliza la videograbadora. Se descargará por
completo en 1 año aproximadamente si no utiliza
la videograbadora en absoluto. Aunque la pila de
vanadio-litio no esté cargada, no afectará al
funcionamiento de la videograbadora. Para
conservar los ajustes de menú, cargue la pila si
está descargada. A continuación se describen
métodos de carga:
•
Conecte la videograbadora a una toma mural
mediante el adaptador de alimentación de CA
suministrado, y déjela con el interruptor
POWER desactivado durante más de 24 horas.
• Instale el paquete de batería completamente
cargado en la videograbadora, y déjela con el
interruptor POWER desactivado durante más
de 24 horas.
28