Resetting the digital security code – Sony SPP-A900 User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Resetting the digital security

code

Since a random security code is automatically assigned between the

base unit and the handset when you charge the battery pack for the

first time, you normally do not need to reset the security code.

However, in the unlikely event that you suspect that another cordless

phone uses the same security code, you can manually change the

code as follows:

Replace the handset on the base unit.

Press ( PAGE ).

Lift the handset for more than one second.

Then replace the handset on the base unit and

keep it for more than three seconds to

complete the code change.

If the battery pack in the handset is completely discharged, or is
removed from the handset for more than several seconds, the
digital security code stored will be lost. If this happens, charge
the battery pack, and a new security code will be automatically
assigned.

Tip

This procedure will change the code in both the base unit and

the handset. The code can be changed as often as desired.

40^" Additional Information