Sony SPP-A900 - Manual (Page 33)

Operating the answering
machine from a touch-tone
phone
By setting your security code, you can operate the answering machine
from a touch-tone phone while you are away from your home.
Setting your security code
1
2
3
4
5
Press C-FLASH/REMOTE).
The TALK/BATT lamp lights up in
red.
Press (D.
Press any two digits for security
code ((S)® - ®®).
Press CD again.
A long confirmation beep sounds.
Press ( FLASH/REMOTE ) again.
The TALK/BATT lamp goes off.
Notes
• Make sure that the RING ON/BATT SAVE switch is set to RING ON.
• If two minutes have passed during setting, the setting is canceled.
If the ring time is set to “Toll-saver"
If any new messages are recorded, the answering machine will
answer after three rings. If no new message is recorded, it will answer
after five rings.
When you call from a touch-tone phone and hear more than three
rings, you will know that there is no new message and you can then
hang up, saving you the cost of the call (see page 23).
Si c
3 w
$ 3'
I
'O
5‘
3 2.
9-T3
3' o
(D 3
(D
continued
Using as a telephone answering machine [ 33™