Speed dialing, Storing phone numbers – Sony SPP-A900 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Features
Speed dialing
You can dial with a touch of a few keys by storing phone number on
a dialing key.
Storing phone numbers
ВАТТ SAVE
Press (
SPEED DIAL/PGM ).
The TALK/BATT lamp flashes in
green.
Press one of the dialing keys (QD
to ®) for the phone number to be
stored.
Enter the phone number you want
to store.
You can enter up to 16 digits,
including a tone and a pause, each
of which is counted as one digit.
Press (
SPEED DIAL7PGM ).
You hear a long confirmation
beep, and the number is stored.
The TALK/BATT lamp goes off.
Notes
To store the previous number dialed, press ( REDIAt7PAUSE ) directly after step 2.
Then go to step 4. If the number exceeds 16 digits or there is no previous number
dialed, five short error beeps sound and storing is canceled.
Do not allow more than 20 seconds to elapse between each step of the procedure.
Make sure that RING ON/BATT SAVE switch is set to RING ON.
Tips
If you enter a wrong number, start from the beginning.
You can’t receive calls while you’re storing numbers.
18^"
I
Advanced Features