beautypg.com

Sales, solutions, and legal information, Worldwide sales and design support, Products – Cypress Perform CY7C1393CV18 User Manual

Page 30: Psoc solutions, Document history page

background image

Document #: 001-07162 Rev. *C

Revised May 22, 2008

Page 30 of 30

QDR RAMs and Quad Data Rate RAMs comprise a new family of products developed by Cypress, IDT, NEC, Renesas, and Samsung. All product and company names mentioned in this document
are the trademarks of their respective holders.

CY7C1392CV18, CY7C1992CV18
CY7C1393CV18, CY7C1394CV18

© Cypress Semiconductor Corporation, 2006-2008. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used
for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use
as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support
systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign),
United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of,
and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress
integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without
the express written permission of Cypress.

Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not
assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where
a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer
assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

Sales, Solutions, and Legal Information

Worldwide Sales and Design Support

Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office
closest to you, visit us at

cypress.com/sales.

Products

PSoC

psoc.cypress.com

Clocks & Buffers

clocks.cypress.com

Wireless

wireless.cypress.com

Memories

memory.cypress.com

Image Sensors

image.cypress.com

PSoC Solutions

General

psoc.cypress.com/solutions

Low Power/Low Voltage

psoc.cypress.com/low-power

Precision Analog

psoc.cypress.com/precision-analog

LCD Drive

psoc.cypress.com/lcd-drive

CAN 2.0b

psoc.cypress.com/can

USB

psoc.cypress.com/usb

Document History Page

Document Title: CY7C1392CV18/CY7C1992CV18/CY7C1393CV18/CY7C1394CV18, 18-Mbit DDR-II SIO SRAM 2-Word
Burst Architecture
Document Number: 001-07162

Rev.

ECN No.

Submission

Date

Orig. of

Change

Description of Change

**

433284

See ECN

NXR

New data sheet

*A

462615

See ECN

NXR

Changed t

CYC

from 100 ns to 50 ns, changed t

TH

and t

TL

from 40 ns to 20 ns, changed

t

TMSS

, t

TDIS

, t

CS

, t

TMSH

, t

TDIH

, t

CH

from

10 ns to 5 ns and changed t

TDOV

from 20 ns

to 10 ns in TAP AC Switching Characteristics table
Modified Power-Up waveform

*B

1523386

See ECN

VKN/AESA Converted from preliminary to final, Updated Logic Block diagram, Updated I

DD

/I

SB

specs, Changed DLL minimum operating frequency from 80MHz to 120MHz, Changed
t

CYC

max spec to 8.4ns for all speed bins, Modified footnotes 20 and 28.

*C

2507766

05/23/08

VKN/PYRS Changed Ambient Temperature with Power Applied from “–10°C to +85°C” to “–55°C

to +125°C” in the “Maximum Ratings“ on page 20, Updated power up sequence
waveform and its description, Added footnote #19 related to I

DD

,

Changed

Θ

JA

spec

from 28.51 to 18.7, Changed

Θ

JC

spec from 5.91 to 4.5, Changed JTAG ID [31:29]

from 001 to 000.

[+] Feedback

This manual is related to the following products: