Trail Tech KTM/HUSQVARNA DIGITAL FAN KIT 732-FN8 User Manual
Page 2
7.) Connect fan kit to bike power. If the motorcycle came from KTM/HUSQVARNA with the fan
harness then the Trail Tech fan kit will plug directly into the factory connector. This is located just
to the left of the radiator in the wiring above the motor
(See above photo).
If the motorcycle did
not come with a factory harness, then install the provided power lead for the fan kit. Connect
the ring terminals directly to the machine’s battery
(Black to negative, red to positive).
8.) Install tank, shrouds and seat back on to the motorcycle.
CHANGING TEMPERATURE UNITS AND FAN SETTING:
SETTING MENU
To enter set up menu, press and hold blue button for 3 seconds.
Release when all LCD segments flash on.
SET TEMPERATURE UNIT
Select Fahrenheit or Celsius by pressing blue button.
TEMPERATURE SETTING
After temperature unit is selected, wait 5 seconds and the word
“Hi” will display. Press and hold blue button to increment or
decrement. Arrow in lower left corner indicates direction of
adjustment. The direction of adjustment will change automatically in 3 seconds if button is not pressed. After 3
more seconds the meter will automatically exit setup mode and resume current temperature display.
Page 2 of 2
Disclaimer: Trail Tech’s Fan Kit does not guarantee your vehicle will not overheat. If steam is present or engine
temperature is high, please stop and wait for engine to cool. Overheating may cause engine damage.