Trail Tech KICKSTAND 5003-KTM User Manual
Kickstand installation, Yamaha
010-ELV-25_R4
TRAIL TECH KICKSTANDS
Tech Support: 360-687-4530
KICKSTAND INSTALLATION
HONDA | YAMAHA | KTM | KAWASAKI | SUZUKI
FOOTPEG BRACKET STYLE
HONDA CRF150R Standard
06-13 5102-00
HONDA CRF150R Expert
06-13
5103-00
HONDA CR 125R/250R
02-03
5001-CR
HONDA CR 125R/250R
04-07
5011-CR
HONDA CRF250R
04-09 5011-CR
HONDA CRF250R
10-13 5104-00
HONDA CRF450R
02-03 5001-CR
HONDA CRF450R
04-08 5011-CR
HONDA CRF450X
04-13 5011-CR
HONDA CRF250X
04-13 5011-CR
HONDA CRF450R
09-12 5104-00
YAMAHA YZF 250/450
06-09
5203-00
YAMAHA YZF 250/450
10-13
5204-00
• Use a T50 torx bit to remove stock footpeg hanger bracket.
KAWASAKI KX250F
07-08
5401-00
KAWASAKI KX250/450F
09-10 5402-00
KAWASAKI KX 450
07-09 5401-00
SUZUKI RMZ250
07-09
5501-00
SUZUKI RMZ450
06-07
5501-00
SUZUKI RMZ450
08-12
5502-00
Remove stock foot peg and hanger. Replace with new hanger and
re-attach stock foot peg. Hang spring as shown in photo. Use
thread locking compound on pivot bolt to ensure it does not loosen.
YAMAHA
YAMAHA YZF/WRF
98-04 5002-YZ/WR
YAMAHA YZ two-stroke 125/250
98-01 5002-YZ/WR
YAMAHA YZ two-stroke 125/250
02-04 5201-00
YAMAHA YZ two-stroke 125/250
05-13 5202-00
Attach mounting bracket to frame as shown to right
using provided bolts. Hang spring as shown to right.
Use thread locking compound on the pivot bolt to
ensure it does not back out.
Note: Bracket for
YZ125 and YZ250 ‘02 and up is different from one
shown to right, but installs the same way.
YAMAHA YZF 250/450
05 5400-00
Remove chain roller nut and bolt. Remove the
lower rear sub-frame bolt. Attach mounting bracket
to frame as shown to left using the new sub-frame
shoulder bolt, blue spacer, and M8x 75mm bolt.
Note in picture to left that spacer is installed behind
the top hole on mounting bracket. Hang spring as
shown to left.
Mount spring hanger tab as shown above for 5104-00 kits.
LIMITED WARRANTY
TRAIL TECH INC. WARRANTS TRAIL TECH KICKSTAND PRODUCTS TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE AND IF PROPERLY
INSTALLED FOR A PERIOD OF SIX MONTHS FROM DATE OF PURCHASE. IF FOUND TO BE DEFECTIVE AS MENTIONED ABOVE, IT WILL BE REPLACED OR REPAIRED. THIS SHALL
CONSTITUTE THE SOLE REMEDY OF THE PURCHASER AND THE SOLE LIABILITY OF TRAIL TECH INC. TO THE EXTENT PERMITTED BY LAW, THE FOREGOING IS EXCLUSIVE AND
IN LIEU OF ALL OTHER WARRANTIES OR REPRESENTATIONS WHETHER EXPRESSED OR IMPLIED, INCLUDED ANY LIMITED WARRANTY OF MERCHANTABILITY OR FITNESS. IN
NO EVENT SHALL TRAIL TECH INC. BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES.