Trail Tech AC VOLTAGE REGULATOR 7003-AC01 - Manual (Page 2)

CRIMP KIT:
Use a crimp kit for
professional, water-
tight connections
like those in the
photographs.
P/N: HT230C
Solder and shrink
wrap will also provide
excellent quality
electrical connections.
010-ELV-106
ADJUSTABLE AC REGULATOR
Tech Support: 360-687-4530
[email protected] AC VOLTAGE REGULATOR
INFORMATION
NOTES:
Improved AC Regulator with Adjustable Output.
Limits voltage to 12.0-16.0 volts AC (adjustable.)
Conditions circuit to eliminate electrical spikes, protects
from lamp blow-outs, and reduces flicker and dimming.
“Dial-a-Brightness” for halogen and quartz lights:
Included in Trail Tech plug-and-play high-output AC
electrical systems with model-specific connectors; no
cutting or splicing required. See model-specific wiring
instructions in those kits.
•
•
•
•
•
1.
2.
At 14.0 VAC setting, the lamps will approach HID
lumens (~70%) but lamp life is short (good for racing.)
At minimum setting, the lamps are not as bright
as HID (~30%), but last over 1,000 hours.
DIAL-A-BRIGHTNESS
LONG LIFE STANDARD HIGH OUTPUT
-1/4
TURNS
12.0 VAC
AS
SHIPPED
13.8 VAC
+1/4
TURNS
14+ VAC*
~1,000 HOUR LAMP LIFE ~500 HOUR LAMP LIFE ~25 HOUR LAMP LIFE
*IMPORTANT:
It is possible to turn the regulator up so far that
the lamp may burn out immediately (voiding lamp
warranty.) Use of a multimeter when calibrating
the regulator is strongly recommended.
IMPORTANT:
There is water sealant on the potentiometer. It will not
interfere with a screw-driver adjusting the regulator. Be
sure to re-seal after adjustment to prevent water entering
the regulator and causing damage. Use silicone, nail
polish, or similar to re-seal.