Tomei Powered OVERSIZED FUEL PUMP(EVO4-9) - Manual (Page 10)

Check the size of the new pump. Then cut
the hose to right length for your
application.
Fit the fuel filter to the pump
with the clip (included). Then fit
the hose clamps over the hose
before installing the cut fuel
hose to the pump.
Then tighten the clamps in place
on the pump side.
Connect the coupler to the fuel pump body, then the fuel hose to
the bracket.
The hose clamp is tightened securely.
Lock into place with the clip
10
Fit the washer to the bracket the same as before.
Fit the rubber cushion as needed (included).
Reinstall the fuel pump assembly back into the
fuel tank.
10