Tomei Powered VACUUM TANK - Manual (Page 4)

4
CAUTION
■ This product has been designed for competition use only and is not to be used on any public roads.
■ The original safety standards of the vehicle will change which will make it illegal to be used on public roads.
■ This product is to be fitted by an experienced professional in a fully equipped workshop.
■ This product is to be fitted with the correct tools, protective & safety equipement. Failure to do so can lead
to possible work hazards.
■ This product is to be installed when the engine and engine bay is cold.
■ Do not use excessive force when removing and installing parts. As this may cause damage to the parts and
related components.
■ Use a torque wrench when tightening bolts to the recommended torque specs. Not doing so can lead to a
loose bolt or damages.
REQUIRED TOOLS
These are the required tools for the installation.
・ General Engine Maintenance Tools ・ Installation Manual
KIT CONTENTS
Please check that your kit contains the following parts. Quantity is shown in ( ).
・ Touch Tubes Φ4 x 4m
・ Hose Φ9 x 50cm
・ Zip Tie (L=300) (2)
・ M6 Cap Bolt (L=15) (4)
・ M6 Nut (4)
・ M6 Spring Washer (8)
Nipper 12m/m Spanner 5m/m Allen Key
Tank (1)
Male Connector (4) Tank Bracket (1)