Tomei Powered METAL ORNAMENT PLATE - Manual (Page 3)

KIT CONTENTS
Below are the parts included in this kit with the quantity no. in brackets ().
REQUIRED TOOLS
The following tools are recommended for the installation process.
* General Maintenance Tools * 4mm HEX * Torque Wrench
CAUTION!
■ This product is designed to be used for off road competition purposes only.
■ This product is to be installed by a qualified professional in a fully equipped workshop.
■ This product is to be installed with the appropriate tools and equipment to prevent any engine failures
and injuries or bodily harm.
■ Please follow the instructions as shown in the Mitsubishi Motors service manual for more detailed
information.
■ This product was designed specifically for the application specified. If the attempt was made to use this
product on another engine/car other than specified then you will risk damaging this kit and or the
engine or components related with it.
INSTALLATION
1. Remove the stock center cover.
2. Fix the TOMEI metal ornament plate with the 4 bolts that were supplied in the kit.
Button Bolt
M6-P1.0 L=35 (4)
Washer
Plate (1)
3. Bolt Torque Specs [11±1 N/m]
3