Connecting the printer to your personal computer – Citizen Systems PD-04 User Manual
Page 36
– 32 –
Connector
Serial Port
Connecting the Printer to your Personal Computer
[When connecting or disconnecting the unit to a personal computer you must power
down both units before hand.
[Use the PD79900 communication cable, sold separately, to connect the printer to
your PC.
[The side marked "PUSH" should be facing up. Attach the cable with a straight
motion.
[Do not force the printer cable in as it can cause damage to the unit. Be careful not
to attempt to plug the printer in with the wrong side of the plug facing up.
[When disconnecting the cable, pull the connector out while pressing the buttons on
both sides with your fingers.
Caution
When Connecting the Printer Cable be
Careful About:
[If only one connector of the printer
cable is connected to the printer and
the other side is free, do not touch
the metal areas of the unconnected
connector.
[There is a chance that the on board
circuits of the printer could be
damaged by static electricity.
[Because of the possibility of damage
to the wire and discoloration, do not
wrap the cable around the printer
when storing it for long periods of time.
Optical Communication Port
to New Portable Information Tools