Citizen Systems PD-04 - Manual (Page 29)

– 25 –
The Handy Printer registers *No
and moves onto the next set up
item. Moves to the next set of
details.
The Handy Printer registers
*Yes and moves onto the next
item for setting. Moves onto
the next set of details.
The Handy Printer registers*Exit
and quits the item
set up. The VuePrint mode is
finished.
Operations Table
Operation Effect
Pressing the paper feed button (FEED).
Moving the paper depress lever up and down
followed by the depression of the paper feed
button (FEED).
Continuous pressing of the paper feed button (FEED).
Order of Set Up
1 The set up is done in the form of a dialog with the printer. First the set up items
and the current setting is printed. Next the user is asked,
Would you like to make any changes?
If there is no need to make changes, the user should select *NO. (Press paper feed
button) The printer moves on to the next item.
2 In the case that there is some change to be made, select *Yes. (After moving the
paper depress lever up and down, press the paper feed button) Then the details of
the item can be adjusted. For each item in turn the question
Would you like to make any changes?
is asked. Please answer *Yes or *No.
Select *Yes for those items that you want to change.
3 After you are finished select *Exit
(by continuously pressing the paper feed button) which allows you to escape from
the current item and moves you to the next one leaving behind the current setting.
When moving to the next item, the item just changed is printed out.
4 When you want to get out of the VuePrint function set mode, select *Exit while in
the item select stage. At this time the printer prints a message to indicate that the
set mode is complete and the printer automatically turns off. From the next time
the printer is turned on the new settings become valid.