Citizen Systems PD-04 - Manual (Page 12)

– 8 –
8
Paper Depressor Lever
When this lever is released it is possible to adjust the paper by hand.
When the lever is down (engaged), the printer is able to print.
9
Print Head Cover
Please remove this cover before cleaning.
ᕍᕠ
AC Adapter Terminal Cover
This cover protects the AC adapter terminal.
ᕍᕗ
AC Adapter Terminal
Plug the AC adapter (sold separately) into this terminal.
ᕍᕘ
Battery Pack Release Lever
Slide this to make it possible to remove the battery pack.
ᕍᕙ
DIP Switch Cover
Remove this cover to adjust the DIP switch settings.
ᕍᕚ
Roll Paper Holder Release Lever
Use this when it is time to remove the roll paper holder pack.
About the Energy Saving Auto-Power off Function.
This printer automatically shuts down if there is no data transmission and no operation
of the paper feed button (FEED) or paper depressor lever for a period of 10 minutes to
prevent depletion of the rechargeable batteries. To power up the unit again you must
first turn the power switch to off and then back to on. In this event, font size or any
other data will be lost.
* The auto power down time can be adjusted in the printer command or in the VuePrint
function-set mode. (Refer to Command Reference)
* However, when using an AC adapter, the Auto-power off function does not operate.
Forms of Data Transmission
This printer has 2 methods of data reception and data transmission.
The RS-232C data cable and Optical communication system. The default is set to
Optical Data Transmission and the RS-232C is defaulted off. The switch for these
functions can be done at the VuePrint function set mode.