Citizen Systems PD-04 - Manual (Page 34)

– 30 –
The Self-Test Print
Before operating the self-test print, make sure that the printer is set to OFF and set the
DIP switch No.1 (see P.22) located on the bottom of the printer to ON. After the self-
test print is finihed, set the DIP switch No.1 back to OFF.
1 ASCII Slide Print
Insert paper. With the paper depress lever up (released), press the paper feed button
and hold it down while turning on the power. The Self-Test Print mode is engaged,
by putting down the paper depress lever,
* the Program version
* the ASCII slide
will automatically be printed.
2 Built-in Font Print
Insert paper. With the paper depress lever down (engaged), press the paper feed
button and hold it down while turning on the power. After a few seconds, the printer
will enter the auto test print mode.
* the Program version
* the built-in font
will automatically be printed.